DPM係列密閉取樣器

Ordering instructions 訂貨須知

1、when ordering please specify name of medium (density and viscosity), flow, pressure and temperature etc.;

1、訂貨時請詳細注明介質名稱（密度和粘度）、流量、壓力和溫度等；

2、the PID process design;

2、工藝設計 PID；

3、please indicate the connection flange standard;

3、請注明連接麵法蘭標準規格；

4、

the requirements of the sampling line material. (the default cooling water pipe material is 304, steam heat tracing for

brass CU + aluminum fins / 304 stainless steel + aluminum fins; special requirements please specify)

4、要求采樣管路材質。（默認冷卻水管路材質為 304,蒸汽伴熱為銅管 CU+鋁片散熱/不鏽鋼 304+鋁片散熱；特別需求請注明）

5, all of the above form sampling system can increase the bracket, box, cooler, heat tracing system, pressure reducer, vacuum

pump, a gas-liquid separator, etc. according to the needs of the adsorption tank.

5、以上所有形式采樣係統都可以根據需要增加支架、箱體、冷卻器、伴熱係統、減壓器、真空泵、氣液分離器、吸附罐等等。